Metal detectors are one of the best presents that anyone would want to offer to his/her beloved ones, you know the reason? This is because its use is versatile.
Although it’s a unit that can be used for hunting of metals, yet it can be used for fun also. It’s an electronic device that aids the search for minerals including ornaments with ease.
Apart from the fact that it eases your efforts during findings, it also makes adventures worth embarking on. Adults and children mostly use it.
However, modern metal detectors are emerging into the marketplace and are even elaborating the crucial needs of metal detectors, how? Users can adjust them to make the use easy.
Not only that, you can now find LCD screens and essential functions on their panels so that anyone can comfortably use them to their optimal benefits.
Notwithstanding, although you can find metal detectors in various sizes, yet it’s still compulsory that intending buyers know that there is a need for assembling.
Of course, to those who are eager to initiate the use immediately after the delivery, it is significant that they are predisposed to this information on how to set up a metal detector, why? Because it would aid them to assemble it without any spoilage or setbacks quickly.
Furthermore, in these studies, we’ll be looking at how an individual can easily set up a metal detector with ease. Therefore, let check out the steps to consider while doing this.
8 Things to Consider about How to Set Up a Metal Detector:
1. Read the Manual
Almost all products come with a user manual. The significance of this is to aid the user in the proper use of the unit.
It helps users to know about the accessories that accompany the delivery and how to utilize each of them. Just as we said earlier, you can find them in almost the delivery box.
So, it’s advisable that users read their content first before using them. However, in a few cases that the illustrations seem not to be clear, it’s fitting that users check the manufacturer website for more information on what they’ve learned.
In a nutshell, before assembling a metal detector, identify the whole part of the unit and know what each of them is used for.
After that, one can now prepare for the assembling. However, before one begins to assemble, here are what to put into consideration:
- Remove all the components and put them in a confined region for apt visibility.
- Check the manual and take full responsibility for their completion.
- Most products don’t come with batteries. However, you’re expected to make the cells available before coupling.
- Ensure that you prudently and meticulously check the manual and know where to unscrew and nut while coupling your unit.
- Get a screwdriver and clean cloth available.
- Afterward, you can proceed with the setup of your unit.
3. Identification of the Components
Nevertheless, provided the manual that you’re using is not detailed. Here is a piece of information that would aid you in identifying the components:
Search Coil: The search coil is the round component mostly found at the base. The importance of this is to aid in the sensitivity of the unit. You can find them to be big and small. However, the bigger it is, the higher the sensitivity and the inverse is the case to the smaller ones.
Stems: Yes! You can find the lower and the upper stems in almost every metal detectors. The lower stem is often connected to the coil below while the upper stem is where the control panel is usually connected onto.
Control Panel: The control panel is mostly found close to the handle and the wings. It’s on the control panel that you’ll see the functions and the LCD screen.
Handles: Modern metal detectors are now fond of wings and a handle. This is to ensure that users utilize the product most conveniently. In other words, metal detectors can be used by both hands and a single hand.
Nuts, cables, and Screws: This is mostly found at the base, where the coil is connected to the lower shaft. Nevertheless, the number of screws and nuts all depend on the product that you purchase. The cables, on the other hand, are connected from the search coil to the control panel.
4. Coupling of the Search Coil to the Shaft
Now that you’ve come to know what search coil is, it’s time to attach it to the shaft (lower stem). Of course, if you never checked your user manual, it may be difficult for you to differentiate between the more moderate and the upper stem.
Nonetheless, the easiest way to solve the puzzle is by checking its structure. Mostly, lower stems don’t have multiple holes on them as the upper stem, but instead, they are thinner and can be snuggly slotted inside the upper stem.
Furthermore, the best way to connect the two is by using the direction on your manual though they are mostly bolted with nuts.
5. Coupling of the Lower Stem to the Top
Remember that you just attached the search coil to the nadir of the lower stem. Now, it’s time to fix the zenith into the bottom of the upper stem (where there are multiple holes).
All you have to do is to slot the tip of the lower stem inside the upper stem. Ensure that the iron attached to the tip of the lower stem is unrelated to the direction of the holes on the top stem, why?
This would help the rod to be apt and firm. Also, users would even be able to adjust the height of the rod by pushing the lower stem upward until the iron at the snaps into the next hole.
6. Setting the Sensitivity
There are modes on the control panels of metal detectors. It’s the mode that aids in the communication between the unit and the user.
Of course, there are two essential modes that you can find on metal detectors. One is the Disc and the second is the Pinpoint. The disc can be used in discriminating unwanted metals while the latter is for searching all metals.
However, it’s advisable for users to cling to pinpoint, why? Because metal detector often mistakes a specific kind of metals for another perhaps due to the topographical and weather condition surrounding the metal now.
7. Ground Balancing
This is a way of checking whether the search coil is fitted or wobbling. Running this test on the unit would increase the sensitivity of the detector and aid users to control the group comfortably.
So, how would one perform the ground balancing? It’s by positioning the unit on the ground and checking whether it would stand upright without bending provided it turns, the screws have to be re-tightened before one begins to use it.
8. Begin the Use
Once all that is done, you can start to use it. However, ensure that the cable is connected from the coil into the port on the control panel. You can even twist the wire around the body of the unit to prevent it from sagging.
Video Metal Detector and Setup
Beginners Guide to metal detecting – Basic Mistakes
This is how to set up a metal detector even as an expert. The writer explained the systematic manner that a novice could inculcate in setting you any metal detector and it would work.
The tips are well researched and highly dependable.
More Metal Detector Reviews: